Reviews Title

This is a k-650 motorbike photo , owned by the review writer.

Hey Russ,
Getting that bike grab is going to help me restore this bike. its a 1972 dnepr k-650 from soviet Ukraine. its been sitting in my garage for Over ten years. i should have it up and running by December.z thanks so much for helping me with getting the bike grab!
one very happy customer

READ MORE REVIEWS.....

News Title Graphic

This is a k-650 motorbike photo , owned by the review writer.

Oneup Motorcycle Products is now a distributer for the 'TEXA' range of Motorcycle Diagnostic Tools. Featuring 'Navigator Wireless' providing technicians with the latest tool for MULTI-BRAND system diagnostics. Used with a PC or Laptop via bluetooth or USB, allows techinians to access the bikes electronic systems for service lamp resets, system identification, error reading / erase functions, system parameter evaluation, ECU configuration, componet activations, setting functions for fuelling adjustments, key programming and much more.


READ MORE.....

Choose UK or USA websites Click to go to United Kingdom Website

Valkyrie Mount

PLEASE READ THE MAIN INSTRUCTIONS BEFORE COMMENCING,
THEN REFER TO THIS SUPPLEMENT.

This mounting has been designed specifically for use with the Valkyrie and must be used in conjunction with the Beam Mounting kit.

With the bike in it's resting position on the side stand take the mounting and position it under the frame rail situated between the swing arm and rear of the gearbox casing.

The mounting is sized to fit between the stand bracket casting and the R/H frame rail.
With this in position place the "U" bolt over the frame then through the plate, now secure the two M8 wing nuts provided, (this becomes part of the bike for lifting yet can be removed at will).

Take the EAZYRIZER lift complete with the two Beam Mountings (slots facing inward) and securely lock them near to the ends or the main lifting arm, now slide the lift under the bike from the R/H side aligning the rear beam under the mounting previously secured to the bike frame.

At this stage holding the bike vertical, turn the screw shaft manually in a clockwise direction to raise the lift and support the bike while you secure the two lower M8 bolts (mounting plate to beam assembly).

See diagram below for reference.

 

CLICK FOR LARGER IMAGE
valkyrie

GO BACK TO >>Instruction Manuals or Accessories

footer-graphic